Woking, Surrey

Resin Injection in Woking

Resin injection is a modern, minimally invasive technique for stabilising ground conditions and re-levelling structures. A specially formulated geopolymer resin is injected through small holes drilled into the ground, where it expands to fill voids, compact loose soils, and lift sunken structures back to level.

Resin Injection for Woking Properties

Woking is built on Bagshot Formation sands and gravels with London clay at depth. While the sandy upper soils are relatively stable, the underlying clay can cause movement in properties with deeper foundations.

Bagshot Formation over London clay. The sand-clay interface can create perched water tables, and where foundations reach the clay, seasonal movement becomes a risk. Our resin injection service is specifically tailored to address these local ground conditions, ensuring effective and lasting results for Woking homeowners.

Benefits of Resin Injection in Woking

Non-invasive — no excavation required
Completed in as little as one day
Suitable for occupied buildings
Environmentally friendly materials
Real-time monitoring during injection
Immediate load-bearing capability

Signs You May Need Resin Injection in Woking

Small cracks developing in walls or floors
Slight settlement or dipping in one area of the property
Loose or unstable ground around the building
Concrete floors or paths starting to sink unevenly
You want a non-invasive alternative to traditional underpinning
Previous repair work that needs reinforcing

How Resin Injection Works in Woking

1

Survey

Ground penetrating radar and level surveys to map subsurface conditions.

2

Preparation

Small injection points are drilled — typically 16mm diameter.

3

Injection

Resin is injected and expands to fill voids and compact soils under real-time monitoring.

4

Verification

Post-treatment survey confirms ground stabilisation and level correction.

Resin Injection FAQs for Woking

What exactly happens during resin injection?

Yes, the process is straightforward. A two-part geopolymer resin is pumped through small 16mm holes drilled into the ground. Once injected, it expands rapidly to fill voids, strengthen weak soil, and can even raise sunken structures — all under real-time monitoring.

How long does the resin last?

Yes, it is permanent. Once cured, the resin is completely inert and will not shrink, decay, or wash away, making it a genuinely long-term solution for ground stabilisation.

Is resin injection safe to use under an occupied building?

Yes, absolutely. The process is specifically designed for use beneath homes, offices, and other occupied structures. There is no excavation, no heavy machinery, and very little noise.

When will I notice a difference?

Yes, almost immediately. In many cases, movement is visible during the injection itself. The resin cures in minutes and the treated ground can bear full loads immediately afterwards.

Get a Free Quote

Resin Injection in Woking — no obligation

Need Resin Injection in Woking?

Get a free, no-obligation quote from our specialist ground engineering team.

Get Free Quote